Portland Pudgy Yacht Tender / Dinghy FAQ

Dragging-the-Pudgy, TannerBasic Specifications Stability and Safety   • Capacity  • Motor Size  • Dinghy Towing  • Carrying on Deck or on Davits Buoyancy Rowing Position and Ergonomics Unsinkable Capsize  • Self Draining, Maintenance Roominess and Storage Versatility and Safety (Family Boat)  • Pudgy or Standard Dinghy Portland Pudgy or Inflatable Boat Portland Pudgy or Inflatable Life Raft  • Sports boat What Colors are Available? Bottom Paint

Note: For detailed information about the Portland Pudgy safety dinghy, see the Owner’s Manual.


What are the dimensions and specifications of the Portland Pudgy safety dinghy?

Please see Technical  for information and photos showing the top quality engineering details and careful workmanship that go into every Portland Pudgy safety dinghy and that set it apart from inflatable boats and most standard dinghies.


inflatable boats or stable dinghy?How does the Pudgy compare to inflatables and to other hard dinghies in terms of stability?

With the Pudgy, as with any hard dinghy, you need to step into the cockpit more or less centered. In any hard dinghy you need to be mindful of where you put your weight. You don’t board the Pudgy by stepping on the gunwale the way you can step on an inflatable’s tube.  With an inflatable, the initial stability is greater when you first board it, in comparison to hard dinghies. However, in rough seas or wind, an inflatable can flip from either wind or wave action, trapping occupants underneath, and it’s impossible to right. The Pudgy, as a lifeboat, is designed for stability in rough seas (hence the soft chine).

The Pudgy is also much more stable than not only inflatables, but also other hard dinghies once you are in the cockpit and when towing.

“It is incredibly stable. We wouldn’t use any other. In the sailing we do a dingy can mean the difference between life or death, and this isn’t in reference to the lifeboat abilities of the pudgy just its stability and durability.” Rolland T., MI

“I spent about 500 miles towing my Pudgy. Never flipped over and towed very well.” James V., FL

Tanner Niue-wharf-02


Pudgy bow shot, TannerHow does the Pudgy compare to inflatable boats and RIBS in terms of unsinkability, ruggedness, and durability?

The Pudgy is made of rugged high quality, compounded, high density polyethylene, which is intrinsically buoyant, and the space under the floor is filled with closed-cell foam. (See Technical Information.)

The European Union’s consumer protection agency did a drop test of the Portland Pudgy, in which they filled the dinghy’s cockpit with one thousand pounds of rock, and dropped into the water from eight feet! The Pudgy just bounced up, didn’t ship water at all, and had plenty of freeboard. No harm done! You couldn’t do that with standard dinghies or inflatable boats.

“Takes a lot of abuse. A very strong, forgiving dinghy. I have met a lot of people who are tired of the air leaks [in their inflatable boats] and did like the Pudgy. It will last me a very long time.” James V., FL

“It is a real workboat built for real world conditions.” Rolland T., MI

Here are some of the ways the Pudgy safety dinghy beats RIBs, inflatable boats, and dinghies with RID kits:

  • Unlike inflatable boats and RIBs, the Portland Pudgy cannot deflate and is unsinkable, with a double hull of rugged polyethylene and floor filled with closed cell foam. You can drag the Pudgy over rocks and coral without tearing a hole and sinking your boat.
  • Unlike inflatable boats and RIBs, it does not need to inflate and cannot deflate.
  • Unlike inflatable boats, it is extremely durable and weather resistant.


Besides durability, stability, and unsinkability what distinguishes the Pudgy from an inflatable boat or RIB?

towing dinghy or towing inflatable boats?The Pudgy rows beautifully and has two rowing positions (with an adjustable middle seat and two sets of oarlock sockets). You can’t really row an inflatable boat.

Unlike inflatable boats or most standard dinghies, it’s a fun sailing dinghy.

Unlike inflatable boats or most standard dinghies, the Pudgy is self-draining when empty or carrying less than 35 pounds.

Unlike inflatable boats or most standard dinghies, it has lots of dry, interior storage space.

It is lighter than most inflatable boats and RIBs.

Unlike inflatable boats, it’s aesthetically pleasing.


How many people can the Pudgy carry?

inflatable boats or buoyant dinghy?The Portland Pudgy safety dinghy is US Coast Guard-approved as follows: ● With no motor: 4 persons or 557 lb (persons and gear) ● With a 2 HP motor: 4 persons or 557 lb (motor, persons and gear.

(Note that even overloaded as in photo above, probably carrying over 700 pounds with five people and a motor, there’s still over ten inches of freeboard.)

“We continue to have great fun with the Pudgy.” Bob and Sheila K., Butte, MT


family car (yacht tender)What size motor can the Portland Pudgy take?

The USCG regulates the motor size on recreational boats, based on length. At 7′ 8″, the USCG specifies a 3 HP motor. Heeding USCG regulations, Honda’s air-cooled 2.3 HP long shaft is an excellent choice for the Portland Pudgy. The Torqeedo 1003L electric motor is also excellent. Watch this Torqeedo video  (you’ll have to scroll down the page a bit).

Because of its high freeboard, the Pudgy needs a long shaft motor.


Does the Pudgy tow well?

Inflatable boats towing or dinghy towing?The Portland Pudgy safety dinghy tows beautifully, incomparably better than inflatable boats or standard dinghies. Because of its buoyancy, stability, and long skeg, the Pudgy tows with minimal drag and tracks perfectly. The triangulated bridle and the placement of the two stainless steel tow eyes add to the perfect balance.

 This video gives you an idea:

Video: Towing Portland Pudgy, Glacier Bay

“I know a little bit about how a Portland Pudgy tows because over the last six months I have pulled the Pudgy about 3100 Nautical Miles. Towing characteristics are important, because even if you have dingy davits you still end up towing your dingy. The Portland Pudgy…tows with minimal drag…much less than our plywood or our inflatable boats.  It doesn’t ship water when you tow it, and if it did, it is a self bailing boat when it is empty.”  Rolland T., MI

Anyone who has towed an inflatable knows that the Pudgy’s performance when towed sets it apart from inflatable boats. For detailed information on towing the Portland Pudgy, carrying it on davits, deck, cabin roof, etc., see Dinghy Towing and Carrying.


Flanagan with Portland Pudgy on deckWhat about carrying the Pudgy yacht tender/lifeboat on deck or on davits?

On Deck or Cabin Roof: The Pudgy’s pram shape allows the boat to fit on the deck or roof of many cruising boats. Pass strong webbing  through the though-holes in the walls of the boat for fastening the boat to strong through-bolts on the deck.

On Arm Davits: Portland Pudgy offers lifting eyes for lifting the Pudgy up into a davit harness. The davit harness then supports the weight of the  boat.

On Swim Platform Davits: Weaver Industries designed a davit system for the Portland Pudgy, that makes use of the through-holes built into the boat.

See Dinghy Towing and Carrying  for more information. 


john c rowing kids squareCan you adjust the rowing position?

The Portland Pudgy has two sets of oarlocks and an adjustable middle seat (for two rowing positions). You just flip the middle seat forward or back, and use the appropriate set of oarlocks. No other dinghy we know of has this important feature.

“My wife and I are very pleased with the Pudgy. With the center seat that flips forward to shift my weight, we can row with my wife in the aft seat without the transom deep in the water, and the boat trimmed nicely.”  Rob L., RI

Unlike inflatable boats, the Portland Pudgy safety dinghy rows beautifully. Inflatable boats are almost impossible to row.


How buoyant is the Portland Pudgy? Is it as buoyant as inflatable boats?

inflatable boats or rigid, unsinkable dinghy?The Portland Pudgy safety dinghy was tested by the US Coast Guard at 557 lb of buoyancy (see photo at left).  Carrying this load, there’s still over ten inches of freeboard. In the USCG test it took an incredible 1855 pounds of weight to submerge (not sink) the dinghy.  See Technical Information for more info.


Inflatable boats and RID kits can deflate. Is the Portland Pudgy unsinkable?

Yes, unlike inflatable boats, standard dinghies, or dinghies with RID kits, the Pudgy is unsinkable. It is made of high density, compounded polyethylene, which is inherently buoyant, and the area under the floor is filled with closed cell foam. The water-tight storage compartments inside the double hull add buoyancy.

In a test, with the hatches deliberately opened and the interior and cockpit flooded, the Pudgy still remained afloat, although submerged to the gunwales. Using the optional pump, we bailed out the interior chambers, and the boat rose up out of the water. We then bailed out the cockpit.  (See Technical Information.)


What  if the Pudgy capsizes?

“I haven’t yet found the winds where capsize seems possible!” Bill K., Sausalito, CA

It’s difficult to capsize the Pudgy, but if you do, it’s very easy to right it, using the handholds in the bottom of the boat. (Note that inflatable boats, if capsized, are almost impossible to right from the water.)

Previous Image
Next Image

info heading

info content

It comes up empty of water because of the thick side walls. This can be life-saving, since hypothermia is a leading cause of fatalities in boating accidents. It’s very easy to climb back in, using the hand-holds in the middle seat.

When used as a lifeboat, with the inflated exposure canopy in place, the canopy adds 400-plus pounds of buoyancy. The empty lifeboat is self-righting. With two adults inside, the Pudgy lies partially on its side; the passengers can right the boat by shifting their weight or waiting for wave action to right it. (See Lifeboat FAQ.)


Is it self-draining? How much maintenance does the Portland Pudgy require?

The Pudgy is low maintenance. It’s self-bailing when carrying around 25 pounds  or less (a real pleasure after a heavy rain). You can tow the Portland Pudgy with the drain plug open, and it stays dry inside.

“When you pull the drain plug, instead of filling up and sinking it drains out completely empty.  This single thing makes the Pudgy 1/10 the chore of owning compared to any other dingy we have had. ” Rolland T., MI

It’s easy to clean inside and out. The gutters in the floor run to the drain, so it’s easy to wash out the cockpit with a good rinse.

The UV treated polyethylene protects against sun damage. Unlike inflatable boats, it is not prone to deteriorate in sunlight.


How roomy is the Portland Pudgy?

top view eye candynew copyBecause of its beamy pram shape, the Portland Pudgy safety dinghy has as much cockpit area as many 9- or 10-foot dinghies and inflatable boats, but takes up less room on deck.

The Portland Pudgy safety dinghy’s roomy cockpit is 16.1 square feet. In addition, there is loads of additional storage room in the interior compartments in the side walls of the boat.

“I have found that my SR19 could use some more room for stuff when going boat camping.  My solution is to put extra stuff in our Portland Pudgy and tow it behind the Arima.” Fred F., NY.

inflatable boats or self-contained dinghy?The interior hull storage space is accessible through five covered hatches. There’s so much interior space that you can stow the entire sail kit inside, as well the oars, provisions, exposure canopy, and other equipment. This storage space is extremely important if you plan to use the Portland Pudgy safety dinghy as a dynamic lifeboat.

Even if you’re just using the storage space for picnic provisions or fishing gear, it’s nice to have such secure storage space. In most standard dinghies and inflatable boats, your gear and supplies are in the open cockpit.


towing inflatable boats or towing stable dinghy?Is the Portland Pudgy safety dinghy a good family boat?

“I enjoy sailing the Pudgy around the marina and the kids love to row and fish from it. Whenever we are using it a crowd gathers and I am bombarded with questions. The old salts ask about its stability, weight and design and most everyone asks ‘where can we get one’… We love our Portland Pudgy and highly recommend it to anyone.” Mike S., CA.

Unlike inflatable boats, the Portland Pudgy is incredibly versatile, so you can use it as a fun sailboat, a rowboat, and a motor boat. The Pudgy’s stability and ease of handling make it the best dinghy for blue water sailors or for kids, a good work deck, and a good platform for diving or fishing. Although designed as a self-rescue dinghy/tender and dynamic lifeboat for blue water sailors, it’s easy and fun to sail, and rows and motors well. The safety designed in for blue water sailors also makes it the best boat for kids on the market, whether for just “messing around” or learning to sail.

“My grand children can row the Pudgy very well since the seat heights are in the correct relationship with the oar and oarlocks which is critical for a starter. We had a hard time getting them out of the Pudgy when it was time for them to go home!” George H., Bustard’s Island, ME. (He ended up buying a second Pudgy, so he wouldn’t have to share with his grandchildren!)

To learn more about the optional accessories, including, sail kit, lifeboat accessories, electrical system, rod holders, and more, click here.


Why would I want a Portland Pudgy safety dinghy instead of a standard dinghy, or a dinghy with an  RID kit?

Here are a few of the things that make the Pudgy superior to standard dinghies and dinghies with RID tube kits:

  • The Portland Pudgy safety dinghy, with a double hull of rugged high density, compounded polyethylene, is extremely durable and can really take a beating.
  • The Pudgy is unsinkable (the floor is filled with closed cell foam), buoyant, and very stable. There is no need for an unsightly and expensive RID kit (which needs to be inflated, and can deflate).
  • The Pudgy is exceptionally buoyant and has a USCG capacity greater than that of many ten-foot dinghies. Even carrying the maximum allowed capacity of 557 pounds, there are still over ten inches of freeboard.
  • The Pudgy is extremely roomy for a dinghy its size. With 16.1 square feet of cockpit area, it is roomier than many nine or ten foot dinghies (this is because of its beamy, pram shape).
  • It has lots of storage space in the cockpit as well as dry interior storage inside the double hull.
  • The Pudgy is difficult to capsize, but if it does, it’s extremely easy to right and it comes up virtually dry.
  • It tracks well, when rowed, towed, or motored, because of the long skeg.
  • It rows beautifully and has two rowing positions (with an adjustable middle seat and two sets of oarlock sockets).
  • It moves along nicely with a small motor.
  • It’s a fun sailing dinghy.
  • Unlike most dinghies, the Pudgy is self-draining when empty or carrying less than 30 pounds. Not only does this make for easy towing, it’s also great after a rain storm.


Why would I want a Portland Pudgy safety dinghy instead of an inflatable life raft?

life raft alternative

Lifeboat 20 miles out in North Sea test.

The Portland Pudgy is unsinkable, and its exposure canopy and other survival gear make it a dynamic life boat you can sail to safety. For detailed information about the Portland Pudgy dynamic lifeboat system, go to Lifeboat FAQ.

“It’s tough, functional, and practical, and if the choice came down to climbing into a traditional life raft or boarding the Pudgy, I know where I’d rather be.” Portland Pudgy, a Tender That Can Save Your Life, by Peter Nielsen, Editor in Chief.  Sail Magazine, September 2010.

The Portland Pudgy dynamic lifeboat is a self-contained unit and integrates with sophisticated safety and survival equipment (including exposure canopy, sea anchor, and sailing kit).  All of the equipment fits inside the double hull of the boat or under the rear seat. We also offer an electrical system, bailing pump, boat covers, and more (see Portland Pudgy Lifeboat Components for more information).  The mast telescopes down and the sail furls around it, and they are stored through the rear access hatch. The exposure canopy and sea anchor also fold up and fit through an interior hatch. The leeboards and the rudder stow neatly under the rear seat. (You can also store oars, ditch bags, food, water, and other equipment in the storage compartments.)

In addition, unlike an inflatable raft, which you must have tested and repacked periodically (and must trust the competence and reliability of the testers), you can test the Portland Pudgy exposure canopy yourself. Here’s a link to a Pudgy owner’s blog describing his Pudgy lifeboat test.

And here’s a very entertaining and informative piece by a Pudgy lifeboat owner, about why he got rid of his inflatable life raft and got a Portland Pudgy.


Is the Portland Pudgy safety dinghy good for hunting and fishing?

inflatable boat or versatile rigid dinghy?“We couldn’t be more pleased with the handling, stability and ‘fish-ability’ of our new boat.” Jim L., Huntington Beach, CA

“The best damn bass boat in Arkansas.” Cecil F., Little Rock, AR

“It is a real workboat built for real world conditions.” Rolland T., MI

For information on the Portland Pudgy’s uses as a sports fishing boat, duck hunting boat, and workboat (rowboat or motorboat), see Portland Pudgy Fishing and Hunting Boat.

inflatable boats or rigid dinghy?For detailed information on the optional accessories available, see Price List.




What colors are available?

The Portland Pudgy yacht tender and safety dinghy is available in warm white, sunset yellow, black, and dark green.


Bottom paint

One Pudgy owner reported good results with a marine wax.  If you do use wax and later decide to use bottom paint you will need to clean ALL the wax off.

There is a relatively new bottom paint for inflatable boats sold at most marine stores.  That paint should have the properties of sticking to plastic type materials that have a flexible surface. To prepare the bottom of the Pudgy, lightly sand with a 180 grit, neatly at and below the water line.  Then wipe thoroughly with LACQUER thinner (not paint thinner) . Bear in mind that paints do not stick very well to polyethylene, but you should have some success. We’re still researching this. Call us for more information.